Description These Free Chlorine water quality test strips combine a wide range of detection with our patented Free Chlorine indicator. Designed to resist interference from monochloramines, this is the ideal product when testing in a food processing environment and for determining whether or not you have the correct amount of sanitizer present. No external chemicals are needed to perform the water quality test. Simple Dip-Wait-Read Testing Method Test strips are sealed individually to protect them Ideal for quick and reliable testing of water Accurate results are achieved in under two minutes This product is safe and easy to use since there are no chemicals to mix, an MSDS is not required Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds as well as rain water as well as food processing environments, water filtration & sanitising Contains: 30 strips Test Time: 1 Minute 20 Seconds Detection Levels: 0, 0.05, 0.1, 0.2, 0.4, 0.8, 1, 1.2, 1.6, 2, 3, 4, 5, 6, 7, 8, 9, 11, 15, 20, 25 ppm (mg/l) How to Use: Dip one test strip into a water sample for 5, 10 or 30 seconds (depending on test method) with a gentle back and forth motion. Remove the strip and shake once, briskly, to remove excess water. Wait 30 seconds if following method A, check immediately if following method B or C and match with colours on colour chart. For best results, please follow instructions carefully. Please note: not suitable to test pool & spa water. To view our full range of Pool & Spa testers, click here. General description: For semi-quantitative determinations. Detection method: colorimetric. Fast, simply dip and read indicator paper. Consists of a plastic strip with attached sealed test paper. Compare colour change of test paper with fields of equal size on colour chart provided. Please note: Store in a cool, dry (below 32°C) place and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids. Please note: that this is a screening test and can not be used to certify water as safe or unsafe for drinking. This test kit provides approximate results ONLY when used in strict accordance with instructions. SimplexHealth expressly disclaims any liability resulting from the use of this product, failure to follow instructions, or reliance of test results. Wash hands before and after use. The contents of the kit should not come in contact with food or consumables. Once the test has been completed, dispose of it responsibly. Made in USA MPN: 481123
