Shop

Description These Ozone Test Strips are a low-cost, fast method of determining levels of dissolved ozone in water up to 0.5 ppm. They do not utilise any glass vials, which makes them ideal for many food and water facilities. Simple Dip-Wait-Read Testing Method Ideal for quick and reliable test of water A mechanical reader is NOT required Accurate results are achieved in under one minute Low detection levels No MSDS required Accurate results in less than 40 seconds Test strips are safely stored in plastic bottle Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds as well as rain water Contains: 50 test strips Testing Levels: 0, 0.05, 0.1, 0.2, 0.3, 0.4, >0.5 ppm (mg/l) Total Test time: approx. 40 sec. How to Use: Dip one strip into a 50ml water sample for 10 seconds. Remove and wait 20 seconds then match to the colour chart. Complete colour matching within 30 seconds. Interferences: Bromine, Iodine and Chlorine will give similar colour reaction. Please note: Store in a cool, dry (below 27°C) place and away from excess heat. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids. Made in USA MPN: 481234